Siemens Sicharge CC AC22-ERK Скачать руководство пользователя страница 5

Страница: 5 / 57

SICHARGE Operating Manual ERK

Operating Manual, 02/2022, A5E48572458-AD

Introduction

1.1

Purpose of this documentation

This operating manual contains information for operating the SICHARGE CC AC22 charging

station.
The operating manual contains information on the prescribed use of the charging station.

WARNING

Failure to comply with the information in these operating instructions may result in the

following:
•

Personal injury

•

Material damage

•

Dangerous situations

Follow also vehicle-specific operating instructions for the respective vehicle.

Validity of the documentation

This document is valid as of software version V71 and hardware version V3.

Changes compared to the previous version

Compared to the 06/2021 edition, this manual contains the following changes:
•

Adaptations to new HMI design

•

Adaptations in the operating manual

1.2

Conventions

The illustrations in the operating manual may differ slightly from the device supplied.
Observe the notes labeled as follows:

Note

A note contains:
•

Important product information

•

Information on how to handle the product

Содержание Sicharge CC AC22-ERK


























































Результаты поиска

Содержание Sicharge CC AC22-ERK

Отзывы:

Похожие инструкции для Sicharge CC AC22-ERK

Бренды по названию

Популярные бренды

Siemens Sicharge CC AC22-ERK, Руководство по эксплуатации

Результаты поиска

Содержание Sicharge CC AC22-ERK

Отзывы:

Похожие инструкции для Sicharge CC AC22-ERK

Бренды по названию

Популярные бренды