Siemens SENTRON PAC3200 Скачать руководство пользователя страница 21

Страница: 21 / 182

Description

3.1 Features

SENTRON PAC3200
Manual, 02/2008, A5E01168664B-04

Monitoring functions

●

Monitoring of 6 limit values. The limit values can be combined according to logic

AND/OR. A group message that indicates the violation of at least one limit value can be

generated using an OR operation.

●

Phase sequence monitor.

●

Status monitoring of the digital input.

●

Monitoring the operating status of the SENTRON PAC3200.

Displays and controls

●

Large backlit graphics LC display for optimal readability even from a distance.

●

Menu-driven parameterization and operation with plaintext display.

●

Choice of output language for menu and text displays.

●

Phase labels selectable (L1, L2, L3 <=> a, b, c).

Power supply

●

AC/DC multi-range power supply:

Supply by 95 to 240 V AC ±10 % / 50 / 60 Hz or

110 to 340 V DC ±10 %.

●

Extra-low voltage DC power supply:

Supply by 24 V, 48 V and 60 V DC ±10 % or

22 to 65 V DC ±10 %.

Installation format

●

Panel-mounting format 96 x 96 mm.

●

Only 51-mm installation depth without expansion module, 73-mm installation depth with

expansion module. The interface connector is plugged into the expansion module on the

side and thus does not increase the installation depth.

Interface

●

Integrated Ethernet interface.

●

Expandable with optional expansion module (e.g. PAC PROFIBUS DP Expansion

Module).

●

Expandable with optional expansion module (e.g. PAC RS485 Expansion Module).

Содержание SENTRON PAC3200























































































































































































Результаты поиска

Содержание SENTRON PAC3200

Отзывы:

Siemens SENTRON PAC3200, Руководство пользователя, Страница: 21 / 182

Результаты поиска

Содержание SENTRON PAC3200

Отзывы: