Siemens SENTRON PAC3200 Скачать руководство пользователя страница 153

Страница: 153 / 182

Parameterize

9.2 Parameterizing the operator interface

SENTRON PAC3200
Manual, 02/2008, A5E01168664B-04

153

To change the password:

Call the "PASSWORD PROTECTION" display.

Go to the "PASSWORD" device setting:

or F3

Open edit mode of the "PASSWORD" device setting:

Change the password with:

and F3

Accept the new password with:

The password is permanently saved and becomes effective immediately.

The display returns to display mode.

Figure 9-26 Change password

Initial situation: Password protection switched on:

If password protection is switched on, the valid password must be entered in order to change

the password.

To change the password:

Call the "PASSWORD PROTECTION" display.

Go to the "PASSWORD" device setting:

or F3

Open edit mode of the "PASSWORD" device setting:

The device opens the "ENTER PASSWORD" dialog box.

Enter the password and confirm with

If you have entered the correct password, the password becomes visible in the

PASSWORD field.

Open edit mode of the device setting "PASSWORD" with:

Change the password with:

and F3

Accept the new password with:

The password is permanently saved and becomes effective immediately.

Содержание SENTRON PAC3200























































































































































































Результаты поиска

Содержание SENTRON PAC3200

Отзывы:

Siemens SENTRON PAC3200, Руководство пользователя, Страница: 153 / 182

Результаты поиска

Содержание SENTRON PAC3200

Отзывы: