manualshive.com logo in svg

Siemens SCALANCE W738-1 M12, Конфигурационные руководства

Поделиться
Скачать
Siemens SCALANCE W738-1 M12 Скачать руководство пользователя страница 64

At system start or when using the 

restart

 command with the option 

memory

or 

factory

, 

the following defaults apply:

Parameter

Default value

size

32

count

3

timeout

1

Result 

The messages relating to the response of the called node are displayed.

4.1.9

ping ipv6

Description

With this command, you request a response from a device in the network. This allows you to 

check whether or not another node is reachable.   

Requirement

● IPv6 is enabled.
● You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

cli>

 or 

cli#

Syntax

Call up the command with the following parameters:

ping ipv6 { <prefix%interface> | fqdn-name <FQDN> } [repeat <count>] 
[size <value>] [anycast] [source {vlan <id> | <source_prefix>}] 
[timeout <value (1-100)>]

The parameters have the following meaning:

Parameter

Description

Range of values / note

prefix

IPv6 address of the destination

Enter a valid IPv6 address.

%interface

optional parameter 
Only necessary when the IPv6 ad‐

dress of the destination is a link-local 

address.

Specify the interface via which the 

packet will be sent.  

fqdn-name

Keyword for a domain name

-

FQDN

Domain name (Fully Qualified Do‐

main Name) of the called node

Maximum of 100 characters

repeat

Keyword for the number of packets to 

be requested

-

Configuration
4.1 System

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

64

Configuration Manual, 09/2017, C79000-G8976-C324-08

Содержание SCALANCE W738-1 M12









































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды