manualshive.com logo in svg

Siemens SCALANCE W738-1 M12, Конфигурационные руководства

Поделиться
Скачать
Siemens SCALANCE W738-1 M12 Скачать руководство пользователя страница 269

Requirement

You are in the Interface Configuration mode of the VAP interface.
The command prompt is as follows: 

cli (config-if-vapX-0-Y)#

Syntax

Call the command without parameter assignment:

no vap wds only

Result 

You have specified who the VAP interface connects to.

Further notes

You display the setting with the 

show wlan vap <vap X 0/Y>

command. 

You enable the function with the 

vap wds only

 command.

See also

vap wds only (access point) (Page 268)

7.1.7

Commands in the WDS Interface Configuration mode

This section describes commands that you can call up in the WDS Interface Configuration 

mode. Depending on the Interface selected, various command sets are available. 
In the Global Configuration mode, enter the 

interface wdsX 0/Y

 command to change to 

this mode.
● If you exit the WDS Interface Configuration mode with the 

exit

 command, you return to 

the Global Configuration mode.

● If you exit the WDS Interface Configuration mode with the 

end

 command, you return to the 

Privileged EXEC mode.

Network structures

7.1 WLAN

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

269

Содержание SCALANCE W738-1 M12









































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды