UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
46 A50010-Y3-C150-2-7619
To display a configured security level, use the following command.
Command Mode
Description
show privilege
Shows a configured security level.
show privilege now
View
Enable
Global
Shows a security level of current mode.
The following is an example of creating the system account
test0
having a security level
10 and
test1
having a security level 1 without password.
SWITCH(config)#
user add test0
level
0
level0user
Changing password for test0
Enter the new password (minimum of 5, maximum of 8 characters)
Please use a combination of upper and lower case letters and numbers.
Enter new password:(Enter)
Bad password: too short.
Warning: weak password (continuing).
Re-enter new password: (Enter)
Password changed.
SWITCH(config)# user add test1 level 1 level1user
Changing password for test1
Enter the new password (minimum of 5, maximum of 8 characters)
Please use a combination of upper and lower case letters and numbers.
Enter new password: (Enter)
Bad password: too short.
Warning: weak password (continuing).
Re-enter new password: (Enter)
Password changed.
SWITCH(config)#
show user
====================================================
User name Description Level
====================================================
test0 level0user 0
test1 level1user 1
SWITCH(config)#
The following is an example of configuring an authority of the security level 0 and 1.
SWITCH(config)#
privilege view level
0
enable
SWITCH(config)#
privilege enable level
0
show
SWITCH(config)#
privilege enable level
1
configure terminal
SWITCH(config)#
show privilege
Command Privilege Level Configuration
-----------------------------------------------
Node All Level Command
EXEC(ENABLE) 1 configure terminal
EXEC(VIEW) 0 enable
EXEC(ENABLE) 0 show
3 entry(s) found.
SWITCH(config)#
In the above configuration, as level 0, it is possible to use only show command in
Privi-
