Siemens S223 Скачать руководство пользователя страница 144

Страница: 144 / 381

UMN:CLI User Manual

SURPASS hiD 6615 S223/S323 R1.5

144 A50010-Y3-C150-2-7619

To delete a specified rule action (

match

), use the following command.

Command Mode

Description

no match deny

no match permit

no match redirect

no match mirror

no match dscp

no match cos

no match ip-prec

no match bandwidth

no match vlan

no match copy-to-cpu

no match counter

no match egress

Rule

Deletes a specified rule action.

To specify a rule action (

no-match

) for the packets

not

matching configured classifying

patterns, use the following command.

Command Mode

Description

no-match deny

Denies a packet.

no-match redirect

PORT

Redirects to specified egress port:
PORT: uplink port number (e.g. 25-28)

no-match mirror

Sends a copy to mirror monitoring port.

no-match dscp

<0-63>

Changes DSCP field, enter DSCP value.

no-match cos

<0-7>

Changes 802.1p class of service, enter CoS value.
0-7: CoS value

no-match cos

<0-7>

overwrite

Overwrites 802.1p CoS field in the packet.
0-7: CoS value

no-match cos same-as-tos-over-

write

Overwrites 802.1p CoS field in the packet same as IP
ToS precedence bits.

no-match ip-prec

<0-7>

Changes IP ToS precedence bits in the packet.
0-7: ToS precedence value

no-match ip-prec same-as-cos

Changes IP ToS precedence bits in the packet, same
as 802.1p CoS value.

no-match copy-to-cpu

Rule

Copies to CPU.

Содержание S223






























































































































































































































































































































































































Результаты поиска

Содержание S223

Отзывы:

Siemens S223, Руководство пользователя, Страница: 144 / 381

Результаты поиска

Содержание S223

Отзывы: