Siemens RWF 50.2, Инструкции по установке, использованию и обслуживанию

Страница: 47 / 72

8.4 Control outputs
OutP
With the RWF50.2, configuration of the outputs relates to the binary outputs (K2 and
K3), and with the RWF50.3, to the analog outputs (A+ and A-). The burner is released
via relay K1.
The switching states of relay K1
Burner release
(LED green), relay K2
Controlling
element OPEN,
and relay K3
Controlling element CLOSE
(yellow LED arrows) are
indicated on the controller front.
The binary outputs of the RWF50.2 offer no setting choices.
The RWF50.3 has an analog output.
The analog output offers the following setting choices:
ConF

OutP

Parameter Value/
selection
Description
1 Analog input
InP1
is delivered
Function
FnCt
Function
4 Controller’s angular positioning is delivered (modulating controller)
0 0...20 mA
1 4...20 mA
2 DC 0...10 V
Signal type
SiGn
Type of signal
Physical output signal
Value when out of
range
rOut
Value when out of
range
0
...101 Signal (in percent) when measuring range is crossed
101 = last output signal
Zero point
OPnt
Zero point
-1999...
0...
+9999
End value
End
End value
-1999...
100...
+9999
A value range of the output variable is assigned to a physical output signal
Only RWV50.2...
Binary outputs
Only RWF50.3...
Analog output
45/68
20089337