RUGGEDCOM WIN5237
Installation Guide
Chapter 2
Installing the Subscriber Station
Assembling the PoE Connector
19
1
2
3
Figure 10: Folding Back the Foil
1.
Foil
2.
Twisted-Pair Wires
3.
Drain Wire
4. Bend the drain wire back over the jacket.
3
1
2
Figure 11: Bending the Drain Wire
1.
Foil
2.
Drain Wire
3.
Twisted-Pair Wires
5. Partially untwist each wire pair, making sure to retain a half twist at the end.
Figure 12: Untwisting the Wire Pairs
6. Arrange the wires according to the following pin-out description:
