Siemens RUGGEDCOM RX1501 Скачать руководство пользователя страница 55

Страница: 55 / 68

Technical Specifications
5.3 Operating Environment

5.3

Operating Environment

The RUGGEDCOM RX1501 is rated to operate under the following environmental

conditions.

IMPORTANT

Temperature limits for select line modules may differ from that which can be with-

stood by the RUGGEDCOM RX1501. Make sure the selected modules are rated for

the expected environmental conditions before deployment. For more information,

refer to the

RUGGEDCOM RX1501 Series Modules Catalog

Ambient Operating Tempera-

ture

-40 to 85 °C (-40 to 185 °F)

Ambient Storage Temperature

-40 to 85 °C (-40 to 185 °F)

Ambient Relative Humidity

5% to 95%

Maximum Altitude

12192 m (40000 ft)

Measured from a 30 cm (12 in) radius surrounding the center of the enclosure.

Operating temperature may vary based on the limitations of installed SFPs. Refer to the

RUGGEDCOM

SFP Transceivers Catalog

for SFP temperature ratings.

Non-condensing.

5.4

Mechanical Specifications

Weight

Approximately 4.7 kg (10.3 lb)

Ingress Protection

IP30

Enclosure

Aluminum

5.5

Dimension Drawings

Note

All dimensions are in millimeters, unless otherwise stated.

RUGGEDCOM RX1501

Installation Manual, 05/2020, C79000-G8976-1054-17

All manuals and user guides at all-guides.com

Содержание RUGGEDCOM RX1501





































































Результаты поиска

Содержание RUGGEDCOM RX1501

Отзывы:

Похожие инструкции для RUGGEDCOM RX1501

Бренды по названию

Популярные бренды

Siemens RUGGEDCOM RX1501, Руководство по установке

Результаты поиска

Содержание RUGGEDCOM RX1501

Отзывы:

Похожие инструкции для RUGGEDCOM RX1501

Бренды по названию

Популярные бренды