Siemens RUGGEDCOM RS900GP, Руководство по установке

Страница: 45 / 46

RUGGEDCOM RS900GP
Installation Guide
Chapter 6
Certification
EMC and Environmental Type Tests 35
Test Description Test Levels Severity Levels
Signal Ports 30 V Continuous 4 IEC 61000-4-16 Mains Frequency Voltage
DC Power Ports 30 V Continuous, 300 V for 1s 4
IEC 61000-4-17 Ripple on DC Power Supply DC Power Ports ± 15% 4
Signal Ports 2 kV (Fail-Safe Relay output) IEC 60255-5 Dielectric Strength
DC Power Ports 1.5 kV
Signal Ports 5 kV (Fail-Safe Relay output) IEC 60255-5 HV Impulse
DC Power Ports 5 kV
EMC Immunity Type Tests per IEEE 1613
NOTE
The RUGGEDCOM RS900GP meets Class 2 requirements for an all-fiber configuration and Class 1
requirements for copper Ports. Class 1 allows for temporary communication loss, while Class 2 requires
error-free and interrupted communications.
Description Test Levels
Enclosure Contact ± 8 kV ESD
Enclosure Air ± 15 kV
Radiated RFI Enclosure Ports 35 V/m
Signal Ports ± 2 kV @ 2.5 kHz
DC Power Ports ± 1.5 kV
Fast Transient
Earth Ground Ports ± 2 kV
Signal Ports 2.2 kV Common Mode @ 1 MHz Oscillatory
DC Power Ports 2.2 kV Common and Differential Mode @ 1 MHz
Signal Ports 5 kV (Failsafe Relay) HV Impulse
DC Power Ports 5 kV
Signal Ports 2 kV (Failsafe Relay) Dielectric Strength
DC Power Ports 1.5 kV
Environmental Type Tests
Test Description Test Levels Severity Levels
IEC 60068-2-1 Cold Temperature Test Ad -40 °C (-40 °F), 16 Hours
IEC 60068-2-2 Dry Heat Test Bd 85 °C (185 °F), 16 Hours
IEC 60255-21-1 Vibration 2g @ 10-150 Hz Class 2
IEC 60255-21-2 Shock 30g @ 11 ms Class 2