Siemens RUGGEDCOM RS416PF, Руководство по установке

Страница: 36 / 56

Communication Ports
4.3 Fiber Optic Ethernet Ports
The total allowable power budget for all ports is 60 W. If the external power supply
is less than 60 W, to prevent exceeding the power budget, port priorities can be
set via the RUGGEDCOM RS416PF operating system to disable low priority ports
when demand is too high. Ports can also be enabled/disabled and placed on a
power schedule to conserve power. For more information, refer to the RUGGEDCOM
RUGGEDCOM RS416PF User Guide for the RUGGEDCOM RS416PF.
For information about connecting the external power supply, refer to "Connecting
External PoE Power (Page 18)" .
LEDs
Each port features a dedicated LED that indicates the state of the port.
State Description
Yellow (Solid) Link established
Yellow (Blinking) Transmitting/receiving
Off No link detected
Pin-Out
The pin-out for the PoE ports is as follows:
8 1
Figure 4.3 RJ45 Ethernet Port PoE Pin
Configuration
Pin Description
1 RX + and Power -
2 RX - and Power -
3 TX + and Power +
4 Reserved (Do
Not Connect)
5 Reserved (Do
Not Connect)
6 TX - and Power +
7 Reserved (Do
Not Connect)
8 Reserved (Do
Not Connect)
Specifications
For specifications on the available PoE ports, refer to "PoE Power Supply
Specifications (Page 35)" .
4.3 Fiber Optic Ethernet Ports
Fiber optic Ethernet ports are available with either MTRJ (Mechanical Transfer
Registered Jack), LC (Lucent Connector), SC (Standard or Subscriber Connector) or ST
RUGGEDCOM RS416PF
Installation Manual, 04/2021, C79000-G8976-1355-04
27