Siemens RUGGEDCOM RS416P Скачать руководство пользователя страница 50

Страница: 50 / 54

Chapter 6

Certification

RUGGEDCOM RS416P

Installation Guide

European Union (EU)

A copy of the CSA Certificate of Compliance is available via Siemens Industry Online Support at

https://

support.industry.siemens.com/cs/ww/en/view/109476557

Section 6.1.2

European Union (EU)

This device is declared by Siemens Canada Ltd to comply with essential requirements and other relevant provisions

of the following EU directives:
•

EN 60950-1

Information Technology Equipment – Safety – Part 1: General Requirements

•

EN 61000-6-2

Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity for Industrial Environments

•

EN 55022

Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement

•

EN 50581

Technical Documentation for the Assessment of Electrical and Electronic Products with Respect to the Restriction

of Hazardous Substances

•

EN 60825-1

Safety of Laser Products – Equipment Classification and Requirements

The device is marked with a CE symbol and can be used throughout the European community.

A copy of the EU Declaration of Conformity is available via Siemens Industry Online Support at

https://

support.industry.siemens.com/cs/ww/en/view/109482109

Section 6.1.3

FCC

This device has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment.
This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case users will be required to

correct the interference at their own expense.

Содержание RUGGEDCOM RS416P























































Результаты поиска

Содержание RUGGEDCOM RS416P

Отзывы:

Siemens RUGGEDCOM RS416P, Руководство по установке, Страница: 50 / 54

Результаты поиска

Содержание RUGGEDCOM RS416P

Отзывы: