Siemens RF182C, Руководство по эксплуатации

Страница: 123 / 128

RF182C communication module
Operating Instructions, 10/2010
123
Addressing of the RFID tags
B
Address space of the MDS versions for MOBY U
Table B- 1 Address space MOBY U
Memory Addressing 16-bit hexadecimal number Integer number
Start address
End address 0000
07FF
+0
+2047
Memory size 08 00 2048
Read OTP memory
(write access only possible once. The OTP memory of MOBY U can only be processed
completely, i.e. the start address must always be specified with value FFF0 hex and the
length with value 10 hex.)
Start address
Length
FFF0
10
-16
+16
2 KB
data
memory
ID No.: (4 fixed-coded bytes; can only be read with the MDS status command)
Start address
End address
0000
7FFF
+0
+32767
Memory size 80 00 32768
Read OTP memory (write access only possible once)*
Start address
Length
FFF0
10
-16
+16
32 KB
data
memory
ID No.: (4 fixed-coded bytes; can only be read with the MDS status command)
Address space of the MDS versions for MOBY D
For address space of the RF300 transponders, see MOBY D System Manual
( http://support.automation.siemens.com/WW/view/en/13628689/0/en ), section "Mobile data
storage units > Introduction".
Address space of the transponder versions for RF300
For address space of the RF300 transponders, see SIMATIC RF300 System Manual
( http://support.automation.siemens.com/WW/view/en/21738946/0/en ), section "RF300
transponders > Memory configuration of the RF300 tags" and section "ISO transponders >
Memory configuration of the ISO tags".