Siemens LOGO! CMR2020 Скачать руководство пользователя страница 164

Страница: 164 / 178

Additional information on SMS

B.1 Response of the CMR when receiving an SMS message/replying to SMS message

LOGO! CMR2020, LOGO! CMR2040

164

Operating Instructions, 10/2016, C79000-G8976-C356-03

The CMR checks the text of the SMS message for keywords or with write SMS commands

first for the password specified in the configuration:

●

If the SMS message does not contain any keywords or no or an incorrect password an

entry is made in the diagnostics buffer.
–

If the SMS message comes from an authorized phone number, a reply SMS message

is always sent.

–

Exception: If the SMS message comes from an unauthorized phone number or “Allow

receipt of SMS messages" is deactivated, the SMS message is discarded.

Password configuration for SMS messages with write access

Note
No semicolon in the password

•

The password must not contain a semicolon ";".

•

The password must be separated from the keyword with a semicolon.

SMS messages with write access can be preceded by a password: You configure this

password using the WBM.
The password counts as the authorization of the user and prevents manipulation of

LOGO! BM or LOGO! CMR values.

Replying to SMS messages

SMS messages from authorized users can be replied to by the CMR (configurable). With

write access, this reply consists of a positive or negative acknowledgement of the write

procedure.

Note
Preventing an SMS message loop with linked CMRs
To avoid several CMRs connected by mobile wireless forming an SMS loop,

acknowledgement frames are received but are not replied to.

The number of SMS jobs/time is limited

The CMR stores a limited number of SMS send jobs in a job queue.
Sending an SMS message may take several seconds due to the delayed transfer in the

mobile wireless network.
Follow the points below to make sure that all SMS messages are sent within the required

time:

●

Adapt the length of the interval for large amounts of data to be sent cyclically, e.g. PI-

SMS messages (monitor SMS) accordingly.

●

Make sure that there is enough time between different actions sending PI-SMS

messages.

Содержание LOGO! CMR2020



















































































































































































Результаты поиска

Содержание LOGO! CMR2020

Отзывы:

Похожие инструкции для LOGO! CMR2020

Бренды по названию

Популярные бренды

Siemens LOGO! CMR2020, Руководство по эксплуатации

Результаты поиска

Содержание LOGO! CMR2020

Отзывы:

Похожие инструкции для LOGO! CMR2020

Бренды по названию

Популярные бренды