Siemens LOGO! CMR2020 Скачать руководство пользователя страница 84

Страница: 84 / 178

Configuration (WBM)

5.9 LAN

LOGO! CMR2020, LOGO! CMR2040

Operating Instructions, 10/2016, C79000-G8976-C356-03

Deleting the configuration of the logging
To delete a loaded configuration again:

●

Click the "Delete" button.
The "Activate logging and save on SD card" check box is disabled and grayed out again.
The CMR is once again in normal operation.

Activate logging

After successful transfer of the configuration file:
1.

The “Activate logging and save on SD card" check box is enabled.

Start the logging by selecting the check box and clicking the "Apply" button.

Note
To spare the SD card: Deactivation recommended
To spare the SD card (working life), deactivate this function again after your problem has

been solved:

•

Deselect the "Activate logging and save on SD card" check box.

•

If you click the "Apply" button, you adopt this setting.

Deactivating logging
If you remove a loaded logging configuration, the check box is disabled and grayed out. The

CMR is once again in normal operation.

5.9

LAN

5.9.1

Configuration

Function of the LAN interface X1P1

●

The X1P1 interface (Ethernet RJ-45) of the CMR is used to connect a local PC for the

configuration.

●

After completed configuration, the X1P1 interface serves to connect to the BM if the CMR

is not being operated in standalone mode.
For information on the operating options, refer to the section Mobile wireless

communication by SMS / e-mail without LOGO! BM (Page 21).

You will find the properties of the X1P1 interface in the section Technical specifications

(Page 141).
By using autonegotiation and autocrossing, the transmission properties of the interface are

detected automatically and set.

Содержание LOGO! CMR2020



















































































































































































Результаты поиска

Содержание LOGO! CMR2020

Отзывы:

Похожие инструкции для LOGO! CMR2020

Бренды по названию

Популярные бренды

Siemens LOGO! CMR2020, Руководство по эксплуатации

Результаты поиска

Содержание LOGO! CMR2020

Отзывы:

Похожие инструкции для LOGO! CMR2020

Бренды по названию

Популярные бренды