Siemens KMS Скачать руководство пользователя страница 77

Страница: 77 / 89

77 / 89

BA 9137 en 12/2015

10.6

Inspection

The inspection comprises all measures for ascertaining and assessing the actual condition.

The measures must be recorded.

Note

The record must be kept with these instructions.

Table 15:

Inspection measures

Measures

Periods

Remarks

General visual check for cracks, leaks
and damage.

every 4 weeks

Visual check of the tooth-flank condition
for damage

annually

Check oil filters of the oil-supply system
for contamination.

every 4 weeks
or if there is heavy
soiling

Optical display, see also operating
instructions oil-supply system.

Check of the instruments installed on
site (temperatures, oil pressures).

every 4 weeks

Inspection of the oil conducting lines for
leaks.

weekly

Oil level check at the oil level indicators
on the gear unit and, if necessary, on
the oil-supply system (version with tank)

weekly

See also operating instructions oil-supply
system.

Check for
- unusual noises,
- temperature,
- safety equipment.

weekly

Check of add-on parts such as
couplings, possibly auxiliary drive.

every 6 months

See operating instructions for the
individual components.

Содержание KMS


























































































Результаты поиска

Содержание KMS

Отзывы:

Похожие инструкции для KMS

Бренды по названию

Популярные бренды

Siemens KMS, Руководство по сборке и эксплуатации

Результаты поиска

Содержание KMS

Отзывы:

Похожие инструкции для KMS

Бренды по названию

Популярные бренды