Siemens KMS Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 89

background image

BA 9137 en 12/2015

NOTICE

Property damage

Damage to the gear unit is possible.
For gear units, which are operated together with electrical machines that generate power or that are
supplied with power (e. g. motors, generators, etc.), it must be ensured that

no

current can flow through

the gear unit. The flow of current can lead to irreparable damages on rolling bearings and gear teeth.
Flow of current can arise, e. g. through short circuits, flash arcs, conductive dust layers, etc.
Suitable measures may be:
– Use of isolators
– Earth the gear unit professionally

DANGER

Electrostatic discharge

Danger to life from ignition of present explosive atmosphere by electrostatic discharge.
A potential equalisation in accordance with the applying regulations and directives must be carried out.
Threaded holes for an earth connection are provided on the gear units or on the output flange. This work
must always be done by

trained electricians

.

NOTICE

Property damage

Damage to the gear unit is possible.
Immediately stop the gear unit by turning off the drive unit when inexplicable changes are noticed
during the operation, such as a significantly increased operating temperature or changed sounds of
the gear unit.

DANGER

Danger to life from rotating and/or moving parts

Risk of being gripped or drawn in by rotating and/or moving parts.
Rotating and/or movable drive parts must be provided with suitable safeguards to prevent contact.

Note

When the gear unit is incorporated in plant or machinery, the manufacturer of such plant or machinery
must ensure that the requirements, notes and descriptions contained in these instructions are
incorporated in its own instructions.

DANGER

Explosion hazard

Danger to life from ignition of present explosive atmosphere by use of unsuitable add-on parts.
All add-on parts must satisfy the requirements in Directive 2014/34/EU.
Simple electrical means (such as monitoring devices, switches, Pt 100 measuring resistance) without
identification in accordance with Directive 2014/34/EU must be connected intrinsically safe by means
of suitable isolation amplifiers.

«
...
10
11
12
13
14
...
»

Содержание KMS


























































































Отзывы:

Нет отзывов

Похожие инструкции для KMS

Sportsound SSR-300

Бренд: Daktronics Страницы: 42

Бренд: Danelec Страницы: 67

PowerXL DX-NET-ETHERNET2-2

Бренд: Eaton Страницы: 48

Power Xpert C445

Бренд: Eaton Страницы: 2

Бренд: Ecler Страницы: 108

Бренд: R&S Страницы: 121

Бренд: Hacker Страницы: 2

Бренд: J.P. SELECTA Страницы: 8

Бренд: Haemonetics Страницы: 134

Бренд: Hadeco Страницы: 72

Бренд: Mangar International Страницы: 8

Бренд: Malvern Instruments Страницы: 30

Бренд: zarges Страницы: 36

Бренд: Tactile Medical Страницы: 23

Бренд: Taarup Страницы: 72

Бренд: TC Electronic Страницы: 4

Бренд: TC Electronic Страницы: 6

Бренд: TC-Helicon Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды