Siemens IQHeat, Руководство пользователя

Страница: 28 / 48

IQHeat
User manual
26
9.4 Pump and valve exercising
The pumps are exercised to prevent them from "jamming" following long-term downtime. Exercising is active
when the pumps are idle, if the downtime is due to the pumps being turned off by the ECO function, i.e. it is
warmer outside than the ECO mode's set outT.
Exercising parameters can be set, for period time and duration. The factory setting is about 30 seconds running
time, 1 time/week.
The pumps must have been idle for at least one hour before they can be exercised.
1. From the Main index select Commissioning .
2. Now select Plant settings > Common .
3. From the Common settings menu select the
parameter to be changed and press OK .
4. After each parameter change, press OK to save
the new settings.
Parameter: Settings
range Explanation
Pump &
valve kick Mon-Sun,
00:00-
23:59 Day and time for start
E.g.:
Mo, *. * > every
Monday at 00:00
Sa, 07:00 > every
Saturday at 07:00
*,*:* > exercising
activated in ranges
Duration
0…200 s
Sets the time for
exercising
E.g.:
10 > duration of 10
seconds
Standby time
0…2000 t Time between
activation times
E.g.:
168 > after 168 hours
NOTE : Pump & valve kick = *,*:* and
Standby time =0 means no pump exercising.
9.5 Save and reset start-up settings and factory settings
The first time IQHeat is started, the Service settings and Factory settings are the same.
After adjustment of the plant-specific parameters such as heating curve, time programs and the like, it is useful
to save these settings for later use if something goes wrong.
The factory settings cannot be changed and they can only be restored from the service level, while the start-up
settings can be restored at end user level.
1. From the Main index select
Systemobjects.
2. Now select Save/load.
3. From the menu select the desired action and
press OK .
Sett.service load Reset to saved settings
Sett.factory load Reset to factory settings
Sett.service save Save the set settings as start-
up settings
4. Confirm with
Apply .