Siemens IQHeat, Руководство пользователя

Страница: 19 / 48

IQHeat
User manual
17
7
Heating circuit
IQHeat gives you the option of making settings for various daily and weekly programs. These can be used, for
example, as automatic night lowering of the flow temperature and thereby the indoor temperature.
The time program that appears under Common cannot be used to control the heating circuits.
See also the description in Chapter
7.5 Heating Limit ECO.
The menus and setting options are the same for all heating circuits, which is why only one heating circuit 1 HC1
appears in these instructions.
NOTE: Access to the menys in this chapter requirer login at end user level
7.1 Operating mode heating
The heating circuit can be set in one of four operating modes:
•
Auto -the plant is controlled by the time program see 7.2 Heat time program .
•
BuildProt - the plant is shut-down but is automatically started when the outside temperature is lower
than the value for Set Plant frost (1,5°), see
9.3 Frost protection .
•
Economy - plant uses set point Room temp eco.
•
Comfort - plant uses the set point Room temp comf
1. From the Main index select Heating Circuit1 .
2. Select Operating mode and press OK .
3. Select preferred operating mode and press OK .