Siemens HiPath 8000 optiPoint 410 Скачать руководство пользователя страница 235

Страница: 235 / 242

Appendix

236

Line Key Status Indication

Direct Station Select key Status Indication

LED

Line status

Description

OFF

Idle

No connected calls.

BLINKING

RAPIDLY

Call waiting mode.

A new incoming call/possible callback is wait-

ing.

(1)or (2)

FLICKERING

Held.

A call held in a queue that can be answered by

the multiline telephone.

BLINKING

SLOWLY

Idle (forwarded)

The line is forwarded immediately (prime line

only)

(3)

BLINKS

SLOWLY

Idle (forwarded)

A secondary line is forwarded immediately

(HiPath 8000 forwarding)

(4)

Busy (local)

(5)

The line is seized by a connection to the multi-

line telephone.

Busy (remote station)

(4)

The line is seized by a connection to another

multiline telephone.

FLICKERING

WEAKLY

All

The line appears on the display, i. e. it is busy.

(1) In the case of a line for which a call is waiting, call waiting mode is maintained so that infor-

mation on the waiting call remains displayed.

(2) A call may already be connected to the line for which a new call is waiting. This is referred

to as "Call Waiting". The connection can be active or held

(3) The LED indicator on the prime line key indicates immediate forwarding instead of an idle

line.

(4) Only if activated by administrator.
(5) An active call is connected to the multiline telephone. A call is connected to the other tele-

phone.

LED

Line status

Description

OFF

Idle

The line assigned is not used.

Busy

The main line of the target telephone is busy.

BLINKING

Incoming call

An incoming call is waiting on the main line of

the target telephone.

Содержание HiPath 8000 optiPoint 410



















































































































































































































































Результаты поиска

Содержание HiPath 8000 optiPoint 410

Отзывы:

Похожие инструкции для HiPath 8000 optiPoint 410

Бренды по названию

Популярные бренды

Siemens HiPath 8000 optiPoint 410, Руководство пользователя

Результаты поиска

Содержание HiPath 8000 optiPoint 410

Отзывы:

Похожие инструкции для HiPath 8000 optiPoint 410

Бренды по названию

Популярные бренды