Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional страница 47 Скачать руководство пользователя

Страница: 47 / 154

Setting the handset

Step by Step

Lighting

You can set whether the display should light up when
the handset is in the charging shell or if it is out of the
charging shell.

Open the handset’s main menu.

[

Select the menu icon and confirm.

[

Select the menu item and confirm.

[

Select the menu item and confirm. The mask for setting
lighting is displayed.

In Charger:

Enable or disable activation.

Move the cursor down one line.

Outside Charger:

Enable or disable activation.

Save setting.

Press the On-hook key to end the operation.

Base station name

You can change the base station name that is displayed
in idle status. The handset must be registered at the
corresponding base.

Open the handset’s main menu.

[

Select the menu icon and confirm.

[

Select the menu item and confirm.

[

Select the menu item and confirm.

[

Select the menu item and confirm.

The selected base is activated. The activated base is
ticked. It can be deactivated by selecting another base.

Change the settings.

Edit Name:

Delete text.

and if necessary

Enter the required text and correct individual characters
as necessary using the "Delete" Display key.

Save the settings.

H/Set Settings

Display

Lighting

Save

H/Set Settings

Handset

Select Base

<Base>

Change

Save

Содержание HiPath 3000 V3.0 or later Gigaset M1 Professional



























































































































































Результаты поиска

Содержание HiPath 3000 V3.0 or later Gigaset M1 Professional

Отзывы:

Похожие инструкции для HiPath 3000 V3.0 or later Gigaset M1 Professional

Бренды по названию

Популярные бренды

Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Руководство по эксплуатации

Результаты поиска

Содержание HiPath 3000 V3.0 or later Gigaset M1 Professional

Отзывы:

Похожие инструкции для HiPath 3000 V3.0 or later Gigaset M1 Professional

Бренды по названию

Популярные бренды