Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional Скачать руководство пользователя страница 118 | Manualshive

Страница: 118 / 154

Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional Скачать руководство пользователя страница 118

Step by Step

Additional functions

108

either:

st

[

Select the menu item and confirm. The appointment is
deleted.

or:

st

[

Select the menu item and confirm. A security check
question appears.

Confirm the security check question. The appointment
reminder list is deleted.

then:

Save setting.

Press the On-hook key to end the operation.

Displaying an unconfirmed appointment

If you have failed to confirm an appointment reminder
call, a Display key is assigned the "Missed Appoint."
function. This unconfirmed appointment must also be
saved in a missed dates list.

Display an appointment. The date and time of the un-
confirmed appointment are displayed.

Displaying an unconfirmed appointment and un-
confirmed anniversaries

Any appointment reminder calls and anniversary calls
you fail to confirm are stored in a missed dates list.

©

Open the handset’s main menu.

st

[

Select the menu icon and confirm.

st

[

Select the menu item and confirm. A list of missed/un-
confirmed appointments is displayed. The last appoint-
ment missed is always on top and the oldest is last.

st

[

Select an unconfirmed appointment or an unconfirmed
anniversary. The relevant information is displayed.

If applicable, delete the selected appointment.

Press the On-hook key to end the operation.

Delete Entry

Delete List

Yes

Save

Appt.

Add. Features

í

Missed Dates

Delete

«
...
116
117
118
119
120
...
»

Содержание HiPath 3000 V3.0 or later Gigaset M1 Professional



























































































































































Отзывы:

Нет отзывов