Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional Скачать руководство пользователя страница 138

Страница: 138 / 154

Appendix

128

The following appears
immediately after the
Talk key is pressed:

Connect.

No dial tone available;
no calls can be made.

Communication sys-
tem is being used by
other users.

Repeat call later.

The following, for
example, appears:

Base 1

Outgoing and incom-

ing calls and activation/
deactivation are not
possible.

Handset is blocked.

Remove the battery pack
from the handset and
then re-insert it. Pro-
ceed as when loading
batteries for first time
(

Page 20).

The following appears:

Time exceeded

Maximum input time
was exceeded.

Avoid long pauses
between keystrokes.

The On-hook key was
not pressed.

Press the On-hook key.

The following appears:

Re-enter code

The communication
system is overloaded.

Wait and try again later.

The following appears:

Currently not availa-
ble

Function is currently
not available.

Wait and try again later.

No connection availa-
ble under the phone
number dialled.

Enter the phone number
correctly or call the
attendant console.

The following appears:

Not possible

or:

Incorrect entry.

or:

Key not pro-
grammed.

Speed-dial number not
available, appointment
entered incorrectly,
entry blocked or not
allowed, prerequisite
not fulfilled
(forexample, if there is
no second partner for
toggling), number
dialled was incomplete.

Correct your input,
select a permitted
option, enter the phone
number in full.

The following appears:

no access

Blocked function was
called.

Apply to the relevant ser-
vice personnel for the
COS for the blocked
function.

The following appears:

Denied

Incorrect PIN was
entered.

Enter the correct PIN.

Error

Possible cause

Remedy

Содержание HiPath 3000 V3.0 or later Gigaset M1 Professional



























































































































































Результаты поиска

Содержание HiPath 3000 V3.0 or later Gigaset M1 Professional

Отзывы:

Похожие инструкции для HiPath 3000 V3.0 or later Gigaset M1 Professional

Бренды по названию

Популярные бренды

Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Руководство по эксплуатации

Результаты поиска

Содержание HiPath 3000 V3.0 or later Gigaset M1 Professional

Отзывы:

Похожие инструкции для HiPath 3000 V3.0 or later Gigaset M1 Professional

Бренды по названию

Популярные бренды