22
1.
Prepare a descaling solution by mixing 300 ml water and
60 ml liquid descaler.
2.
Empty the water tank and fill with descaling solution.
Caution!
Risk of surface damage: If descaler comes into contact with the
front of the appliance or any other sensitive surfaces, wash it off
immediately with water.
Starting descaling
The cooking compartment must have cooled down completely.
1.
Press the
‡
button to switch on the appliance.
2.
Press the
s
button.
"Clean" appears in the display.
3.
Turn the rotary selector until "Descale" appears.
4.
Slide in the water tank containing the descaling solution and
close the appliance door.
5.
Press the Start button.
The descaling process starts. The light in the cooking
compartment remains switched off.
Emptying the evaporator dish and refilling the water tank
A signal sounds after approx. 30 minutes. "Empty dish and refill
water tank" and "
x
0:40" appear in the display.
1.
Open the appliance door.
2.
Remove the descaling solution from the evaporator dish
using the cleaning sponge supplied.
3.
Rinse the water tank thoroughly, fill with water and reinsert.
"Appliance ready to rinse" appears in the display.
4.
Close the appliance door.
"Continue operation with 'Start'" appears in the display.
1st rinse
Press the Start button.
The appliance starts rinsing. “1st rinse” and the cooking time
x
appear in the display.
Empty evaporator dish
After 20 seconds, "Empty dish" and "
x
0:20" appear in the
display.
1.
Open the appliance door.
"Appliance ready to rinse" appears in the display.
2.
Thoroughly rinse out the cleaning sponge.
3.
Remove the remaining water from the evaporator dish using
the cleaning sponge.
4.
Close the appliance door.
"Continue operation with 'Start'" appears in the display.
2nd rinse
Press the Start button.
The appliance starts rinsing. “2nd rinse” and the cooking time
x
appear in the display.
Removing the remaining water
After 20 seconds, "Empty dish" appears in the display.
1.
Open the appliance door.
“End” and “
x
0:00” appear in the display.
2.
Remove the remaining water from the evaporator dish using
the cleaning sponge.
3.
Wipe out the cooking compartment using the cleaning
sponge and then dry with a soft cloth.
4.
Press the
‡
button to switch off the appliance.
Descaling is complete.
Cancelling the descaling
Note:
After cancelling the descaling, you must rinse the
appliance twice. The appliance is locked against other
applications until the second rinsing operation is complete.
1.
Press the Stop button to cancel the descaling process.
"Continue operation with 'Start'" and "Descale" appear in the
display.
To ensure that no descaling solution remains in the
appliance, it must be rinsed twice after a cancellation.
2.
Press the Start button.
"Empty dish and refill water tank" appears in the display.
Now proceed as described in the "Emptying the evaporator
dish and refilling the water tank" section.
Descaling the evaporator dish only
You can also use "Descale" if you do not wish to descale the
whole appliance, but only the evaporator dish in the cooking
compartment.
The only difference is as follows:
1.
Prepare a descaling solution by mixing 100 ml water and
20 ml liquid descaler.
2.
Completely fill the evaporator dish with descaling solution.
3.
Fill the water tank with water only.
4.
Start "Descale" as described.
You can also descale the evaporator dish manually.
Removing and fitting the appliance door
You can remove the appliance door to clean it more
thoroughly.
:
Risk of injury!
The hinges of the appliance door may snap shut with great
force. Always open the hinge locking lever fully when removing
the appliance door and close it fully after refitting. Do not reach
into the hinge.
:
Risk of injury!
If the appliance door has only been unhinged on one side, do
not reach into the hinge. The hinge can snap back with great
force. Call the after
sales service.
Removing the appliance door
1.
Open the appliance door fully.
2.
Fold out the locking levers on the left and right fully (figure A).
The hinges are secured and cannot snap closed.
3.
Close the appliance door until you feel some resistance.
4.
With both hands, grip the door on the left and right-hand side,
close the door a little more and pull it out (Fig. B).
Fitting the appliance door
Refit the appliance door after cleaning.
1.
Insert the hinges in the left and right-hand bracket (figure C).
The notch on both hinges must engage.
2.
Open the appliance door fully.
$
%
www.devicemanuals.eu/
