61
Making calls using network services
Gigaset DX800A all in one / GRC EN / A31008-N3100-T101-1-7619 / netservices.fm / 31.08.10
V
e
rsion 4, 16.0
9
.2005
¤
You can enter data in the following fields:
Status
Activate/deactivate call divert.
Phone Number
Enter the number to which the call is to
be diverted. For every connection, you
can specify a different fixed line, VoIP or
mobile number.
You must specify another Gigaset.net
number when diverting a call from your
Gigaset.net number.
When
Select
All Calls
/
When Busy
/
No Answer
.
All Calls:
Calls are diverted immediately
i.e., no calls are signalled to this /phone
number on your base.
No Answer
: Calls are diverted if no one
accepts the call within several rings.
When Busy:
Calls are diverted when your
line is busy.
§Save§
Press the display key.
For diverting calls from a fixed line or ISDN
connection:
A connection is established to the telephone
network to activate/deactivate call divert.
¤
After confirmation from the fixed line,
press the red end key
T
.
Diverting calls internally
You can divert all
external
calls intended for
a base receive connection to a handset or
device connected to the FAX port.
v
¢
Ç
Select Services
¢
Call Divert
Internal
Select and press
§OK§
.
¤
You can enter data in the following fields:
Status
Activate/deactivate call divert.
To handset
Select internal party.
No HS
is displayed if internal call divert
has not been set previously or if the pre-
viously set handset is no longer regis-
tered.
Ring delay
If you prefer to have a delay before the
call is diverted, select the length of the
delay (
None
,
10 sec.
,
20 sec.
or
30 sec.
).
If you select
None
, the call is not signalled
on the base and is diverted immediately.
§Save§
Press the display key.
Internal call divert is only single-stage i.e., if
calls for the base are diverted to a handset
(e.g., MT1) on which a call divert is also active
(e.g., to MT2), this second call divert is not
activated. The calls are signalled on handset
MT1.
Activating/deactivating call
waiting for external calls
If the function is activated, during an
exter-
nal
call you will hear a call waiting tone to
signal that another external caller is trying to
get through. If you have CLIP, the number of
the waiting caller or the corresponding
directory entry is shown in the display.
The caller will hear the ringing tone.
When call waiting is deactivated, the caller
will hear the busy tone if you are already
making a call, you are the only party
assigned to this connection and this connec-
tion is not assigned to an answering
machine.
Please note
Diverting calls to your phone numbers
can result in additional costs. Please con-
sult your provider.
Please note
u
Any call for the base that has been
diverted is entered in the base call
lists.
u
If a call to a receive connection that is
only assigned to the base is diverted
to a handset that is not available (e.g,.
the handset is deactivated), the call is
rejected after a short time.
