background image

170

Glossary

Gigaset DX800A all in one / GRC EN / A31008-N3100-T101-1-7619 / Glossary.fm / 31.08.10

V

e

rsion 4, 16.0

9

.2005

Dynamic IP address

A dynamic IP address is assigned to a net-
work component automatically via 

DHCP

The dynamic IP address for a network com-
ponent can change every time it registers or 
at certain time intervals.

See also: 

Fixed IP address

DynDNS 

Dynamic DNS

Domain names and IP addresses are 
assigned via 

DNS

. Fo

Dynamic IP address

es

 

this service is enhanced with "Dynamic 
DNS". This permits the use of a network com-
ponent with a dynamic IP address as a 

Server

 on the 

Internet

. DynDNS ensures 

that a service can always be addressed on 
the Internet under the same 

Domain name

,

 

regardless of the current IP address.

E

ECT

Explicit Call Transfer

Participant A calls participant B. The partici-
pant puts the connection on hold and calls 
participant C. Rather than connect everyone 
in a three-party conference, A now transfers 
participant B to C and hangs up.

EEPROM 

Electrically Eraseable Programmable Read Only 
Memory

Memory building block in your phone with 
fixed data (e.g., default and customised set-
tings) and data saved automatically (e.g., call 
list entries).

Ethernet network

Wired 

LAN

.

F

Firewall

You can use a firewall to protect your net-
work against unauthorised external access. 
This involves combining various measures 
and technologies (hardware and/or soft-
ware) to control the flow of data between a 
private network you wish to protect and an 
unprotected network (e.g., the Internet). 

See also: 

NAT

.

Firmware

Device software in which basic information 
is saved for the functioning of a device. To 
correct errors or update the device software, 
a new version of the firmware can be loaded 
into the device's memory (firmware update).

Fixed IP address

A fixed IP address is assigned to a network 
component manually during network con-
figuration. Unlike the 

Dynamic IP address

, a 

fixed IP address does not change.

Flat rate

Billing system for an 

Internet

 connection. 

The Internet provider charges a set monthly 
fee. There are no additional charges for the 
duration of the connection or number of 
connections.

Fragmentation

Data packets that are too big are split into 
smaller packets (fragments) before they are 
transferred. They are put together again 
when they reach the recipient (defrag-
mented). 

Full duplex

Data transmission is a mode in which data 
can be sent and received at the same time.

Содержание Gigaset DX800A all in one































































































































































































Отзывы: