137
Configuring the system settings
Gigaset DX800A all in one / GRC EN / A31008-N3100-T101-1-7619 / settings.fm / 31.08.10
V
e
rsion 4, 16.0
9
.2005
Each time you run the IP wizard you can
configure/reconfigure
one
VoIP connection
(IP account).
¤
Restart the IP wizard if you wish to config-
ure/reconfigure another VoIP connec-
tion.
Automatic update for the VoIP
provider settings
After the first download of the VoIP provider
settings, your phone will check daily
whether a newer version of the file for your
VoIP provider is available from the Internet
on the configuration server. If there is an
update available, the message
New profile
available. Update?
is displayed in the idle
display of the base.
§Yes§
Press the display key to confirm
the prompt.
~
Enter the system PIN if neces-
sary and press
§OK§
.
The new data for your VoIP provider will be
downloaded and saved on the phone.
If you answer the prompt with
§No§
, the
phone returns to idle status. Your telephone
will not remind you of this new profile again.
The message will only be shown again if a
newer version of the provider data is availa-
ble.
A profile update will only be started if no
other profile or firmware update is taking
place at the time.
Assigning send and receive
connections to internal
parties
If you have several connections configured
for your telephone system, you can do the
following for each internal party:
u
Assign a send connection or allow the
internal party to select the line for each
external call (select line).
u
Assign one or several receive connec-
tions. Only calls received via one of the
assigned connections are signalled on
the device.
Assigning a send connection
Prerequisite:
Several phone numbers are
configured for your base.
v
¢
Ï
Settings
¢
Telephony
¢
Send Connections
A list of the internal parties (base, handsets,
fax machine INT8 – where applicable) is dis-
played.
q
Select the internal parties that
should be assigned a new send
connection and press the dis-
play key
§OK§
.
r
Select
Select at each call
or an
connection as the send connec-
tion. All configured connections
are displayed with the names
you have set.
§Save§
Press the display key to save the
changes.
Select at each call
is only offered if more
than one connection is configured on the
base.
If you select
Select at each call
, the internal
party can select which MSN is used to estab-
lish a connection every time he makes a call.
