Siemens Gigaset DX800A all in one Скачать руководство пользователя

Страница: 119 / 190

118

Connecting/using other devices

Gigaset DX800A all in one / GRC EN / A31008-N3100-T101-1-7619 / HS_and_other_Devices.fm / 31.08.10

rsion 4, 16.0

.2005

Registering Bluetooth devices

To register a Bluetooth device, you need to
search for it and then add it to the list of
known devices.

The list of known devices can hold a maxi-
mum of one headset and five data devices/
mobiles.

Searching for Bluetooth devices

The distance between the base in Bluetooth
mode and the activated Bluetooth device
(headset, mobile or data device) should be
no more than 10 m.

Any incoming calls are ignored during the
search.

Bluetooth

Search for Headset

Search for Mobile /

Search for Data Device

Bluetooth mode is activated automatically
on the base if it is not already active. The
search is started. This can take up to
30 seconds.

The Bluetooth names of the devices found
are displayed in a list (abbreviated if neces-
sary). If no name has been assigned to a
device, the device address is shown.

Cancelling/repeating current search

Cancel the search:

§Cancel§

Press the display key.

Repeat search if necessary:
In the known devices list:

§Options§

Press the display key.

Repeat Search

Select and press

§OK§

Displaying the name and address of
a device found

In the list of devices found:

Select entry.

§View§

Press the display key.

The device name and address are displayed.
Press

§OK§

to return to the list.

Adding the data device/mobile to the
known devices list

In the list of devices found:

Select the device to be regis-
tered.

§Options§

Press the display key.

Trust Device

Select and press

§OK§

If the list of known devices contains fewer
than five data devices and mobiles:

Enter a PIN of your choice or the
PIN of the Bluetooth device

be registered

and press

§OK§

Generally you can enter a PIN of your choice
for a data device/GSM mobile. You must also
enter this PIN in the data device/mobile
(handshake).

The device is saved in the list of known
devices.

If the list of known devices already contains
five data devices/mobiles, then the PIN
prompt is preceded by the message

Select

device to be replaced and trust again

. You

must select a device from the list to be
replaced by the new device before registra-
tion.

Please note

If you register a headset, any headset
that is already registered will be over-
written.

If you would like to use a headset
already registered to another device
(e.g., a mobile) with your base, please

deactivate

this connection before

you start the registration process.

Depending on the Bluetooth profiles
supported by your mobile, it can be
registered as a data device and a
mobile.

Please note

The

Search for Data Device

function will

list all Bluetooth devices found with the
exception of headsets (list includes
multi-service devices).

Содержание Gigaset DX800A all in one































































































































































































Результаты поиска

Содержание Gigaset DX800A all in one

Отзывы:

Похожие инструкции для Gigaset DX800A all in one

Бренды по названию

Популярные бренды

Siemens Gigaset DX800A all in one, Руководство пользователя

Результаты поиска

Содержание Gigaset DX800A all in one

Отзывы:

Похожие инструкции для Gigaset DX800A all in one

Бренды по названию

Популярные бренды