Siemens Gigaset CE460 IP R Скачать руководство пользователя страница 13

Страница: 13 / 159

First steps

Setting up the handset for use

CE 450 IP R / IM-Ost english / A31008-M1817-R601_1-7619 / starting.fm / 02.03.2007

ion 2,

.12.

2006

Opening the battery cover

If fitted, remove belt clip.

Insert a fingernail into the notch and pull the battery cover upwards.

Connecting the charging cradle

Connecting the charging cradle and mounting it on the wall (if required) is described at the

end of this user guide.

To charge the batteries, leave the handset in the charging cradle.

For questions and problems see page 113.

Initial charging and discharging of batteries

Battery charging is indicated in the top right of the display by a flashing battery icon

. During handset operation, the battery icon indicates the charge status of the

batteries (page 1).
The correct charge status can only be displayed when the batteries are first fully charged

and

discharged through use.

To do this, leave the handset in the charging cradle without interruption until the bat-

tery icon stops flashing in the display (around 13 hours).

Once the batteries are fully charged, remove the handset from the charging cradle and

do not put it back again until the batteries are fully discharged.

Please note:

Always repeat the charging and discharging procedure if you remove the batteries from

the handset and reinsert them.

Please note:

– Only place the handset in the charging cradle that is intended for it.
– If the handset has switched itself off because the batteries are flat and if it is then placed in the

charging cradle, it will switch itself on automatically.

Please note:

After the first battery charge

and

discharge, you may place your handset in the charging cradle after

every call.

Содержание Gigaset CE460 IP R
































































































































































Результаты поиска

Содержание Gigaset CE460 IP R

Отзывы:

Похожие инструкции для Gigaset CE460 IP R

Бренды по названию

Популярные бренды

Siemens Gigaset CE460 IP R, Руководство пользователя

Результаты поиска

Содержание Gigaset CE460 IP R

Отзывы:

Похожие инструкции для Gigaset CE460 IP R

Бренды по названию

Популярные бренды