Siemens EF6 Series, Инструкция по эксплуатации

Страница: 14 / 16

14
Changing the basic settings
The hob must be switched off.
1.
Switch on the front left hotplate
“
at heat setting 1.
2.
Within the next 10 seconds, touch the 0 symbol for
4 seconds.
™‚ appears on the left-hand display and ‹ on the right-hand
display.
3.
Touch the
0
symbol repeatedly until the desired symbol
appears on the left-hand display.
4.
Touch the
ð
or
S
symbol repeatedly until the desired setting
appears in the display.
5.
Touch the 0 symbol for 4 seconds.
The setting is activated.
6.
Switch off all hotplates.
Exit the basic settings without making any modifications
Switch off the hob and reset.
Cleaning and care
The information in this section provides help on how best to
care for your hob.
Suitable maintenance and cleaning products can be purchased
from the after-sales service or in our e-Shop.
Ceramic
Clean the hob after each use. This will prevent spills from
burning onto the ceramic.
Only clean the hob when it has cooled down sufficiently.
Use only cleaning agents which are suitable for ceramic. Follow
the cleaning instructions on the packaging.
Never use:
■
Undiluted washing-up liquid
■
Detergent intended for dishwashers
■
Scouring agents
■
Harsh cleaning agents such as oven spray or stain remover
■
Abrasive sponges
■
High-pressure cleaners or steam jet cleaners
Ground-in dirt can be best removed with a glass scraper,
available from retailers. Please note the manufacturer's
instructions.
You can also obtain a suitable glass scraper from our after-
sales service or from the e-Shop.
Hob surround
To prevent damage to the hob surround, please observe the
following instructions:
■
Use only warm, soapy water.
■
Do not use harsh or abrasive agents.
■
Do not use the glass scraper.
Cooking sensors
The sensor window on the cooking sensor must always be
clean. Remove flecks of fat and dirt regularly. To do so, use
cotton buds or a soft cloth with soapy water and glass cleaner.
Unsuitable cleaning agents
Do not use:
■
Scratchy objects, such as scourers and scrubbing brushes
■
Cream cleaner.
™ˆ
Activation of the filament circuits
‹
Switched off.
‚
Switched on.
ƒ
Last setting before the hotplate was switched off.*
™‹
Reset to basic setting
‹
Switched off.
‚
Switched on.
Indicator Function
*Basic setting
V
V