5 / 22
Siemens
Desigo Touch and Web
CM111029en_04
Building Technologies
About this document – Before you start
2014-08-15
0.3.3 Quality
assurance
These documents were prepared with great care.
·
The contents of all documents are checked at regular intervals.
·
All necessary corrections are included in subsequent versions.
·
Documents are automatically amended as a consequence of modifications and
corrections to the products described.
Please make sure that you are aware of the latest document revision date.
If you find any lack of clarity while using this document, or if you have any criticisms
or suggestions, please contact your local POC at the nearest branch office. Ad-
dresses for Siemens RCs are available at www.siemens.com/sbt
.
0.3.4 Document use/ request to the reader
Before using our products, it is important that you read the documents supplied
with or ordered at the same time as the products (equipment, applications, tools
etc.) carefully and in full.
We recommend using the
E-learning E01DETP
prior to using Desigo Touch and
Web.
We assume that persons using our products and documents are authorized and
properly trained and have the requisite technical knowledge to use our products as
intended.
Additional information on products and applications is available:
·
On the intranet (for Siemens employees only) at
https://workspace.sbt.siemens.com/content/00001123/default.aspx
·
At your next Siemens branch office
or at your system
suppliers.
·
From the support team at headquarters
no local POC is available.
Siemens assumes no liability to the extent allowed under the law for any losses
resulting from a failure to comply with the aforementioned points or for the improp-
er compliance of the same.
0.3.5 Document
validity
This document applies to Desigo systems satisfying operation as listed in Section
2.3 – Supported browsers. It discusses the following topics in addition to adminis-
trative information:
·
Brief introduction (availability of web interface, customization of views and
functions).
·
The topology as a context of the touch panels.
·
Prerequisites of commissioning.
·
Commissioning of the touch panels.
·
Setting options for brightness, language, time format, date format, keypad, au-
to logout, change location, change network/server settings.
·
System (compatibility, standard clients, browser compatibility, system limits,
and further technical issues.
