en
Drying
32
5.
Place the small tube at the end of the connection
hose into the container. If required, secure the small
tube onto the container using the clip .
6.
Close the appliance door.
22.2 Setting the rinsing programme
Requirement:
"Preparing for rinsing", Page 31
1.
Press "Cleaning".
2.
Press "Rinsing".
The duration cannot be changed.
3.
Press "Start".
a
A message stating that you should carry out the ne-
cessary preparatory work for rinsing appears on the
display.
4.
Confirm the message.
a
Rinsing starts and the duration counts down.
a
Once rinsing has ended, a signal tone sounds. A
message appears on the display confirming that the
operation has finished.
5.
Press to switch the appliance off.
6.
"Preparing the appliance for operation after rins-
22.3 Preparing the appliance for operation
after rinsing
1.
Remove the connecting hose in the cooking com-
partment from the socket.
2.
Remove the container, with the connecting hose,
from the cooking compartment, then empty and
clean it.
3.
Wipe any liquid which has escaped from the cook-
ing compartment floor, then wipe with clean water
and dry with a soft cloth.
4.
Attach the shelf supports as required.
23 Drying
To prevent residual moisture , dry the cooking compart-
ment following operation with steam.
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120 °C, this will damage the enamel.
▶
Do not use the appliance if there is water on the
cooking compartment floor.
▶
Wipe away any water on the cooking compartment
floor before operation.
23.1 Drying the cooking compartment
You can dry the cooking compartment by hand or use
the "Drying" function.
1.
Allow the appliance to cool down.
2.
Remove dirt from the cooking compartment.
3.
Wipe away the water in the cooking compartment.
4.
Dry the cooking compartment.
‒
To dry the cooking compartment, leave the appli-
ance door open for 1 hour.
‒
To use the "Drying" function, set "Drying".
"Setting the drying process", Page 32
Setting the drying process
Requirement:
"Drying the cooking compartment",
1.
Press "Cleaning".
2.
Press "Drying".
The duration cannot be changed.
3.
Press "Start".
a
A notification stating that you should carry out the
necessary preparatory work for the drying appears
on the display.
4.
Confirm the notification.
a
The drying process starts and the duration counts
down.
a
Once the drying has ended, a signal tone sounds. A
notification appears on the display confirming that
the operation has finished.
5.
Press to switch the appliance off.
6.
To dry the cooking compartment completely, leave
the appliance door open for 1 to 2 minutes.
24 Appliance door
To clean the appliance door thoroughly, you can disas-
semble the appliance door.
Note:
Wipe the condensate trough without pressure.
24.1 Detaching the appliance door
WARNING ‒ Risk of injury!
Components inside the appliance door may have sharp
edges.
▶
Wear protective gloves.
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
▶
Keep your hands away from the hinges.
