BTC-BR User’s Manual
6
2 – Functions Available
In this chapter will be detailed all the functions available in portable tachograph programmer, some
common to both lines of tachograph, KTCO e MTCO. All functions are accessed through the alpha-
numerical keyboard and then will be seen as using it.
All data entry is highlighted with underscore characters indicating that the
“edition” mode will be active.
2.1 – Using the Keyboard
5
6
⇒
direction of the cursor (Menu)
3
4
⇒
direction of the cursor (Edition)
E
⇒
confirms operation
C
⇒
cancel operation or return to the previous
menu
L
⇒
clean a field of data, letters and numbers
(edition mode)
F1
⇒
use only in some cases, being specified
when this occurs
F2
⇒
return the keyboard to the numerical mode,
i.e., numbers
0-9
, “
.
” and “
+/-
“ ( edition mode)
F3
⇒
use characters from
A
to
M
of the keyboard,
located at the top left of the numerical
keyboard. The yellow led, corresponding to
this selection, will be lit, showing that this
function is enabled (edition mode)
F4
⇒
use characters from
N
to
Z
of the keyboard,
located at the top right of the numerical
keyboard. The green led, corresponding to this
selection, will be lit, showing that this function
is enabled (edition mode)