BTC-BR User’s Manual
19
2.4.9.2 – Date - Time
Steps
Contents of the display Keys
Procedures
1
2
3
Note:
in this function should be adjust the value of hours always with 01 (one) hour more than the
desired. This is necessary because the Tachograph Programmer / Calibrator leaves the factory
with a pre-adjusted time zone in less one hour (–01:00hs) than the desired time to adjust. This
difference is compensated at the time of adjustment of hours. For instance: in case of wanting
to adjust the hours to 12:10 pm, you must enter 13:10hs and the calibrator itself will correct the
difference.
ATTENTION: Every time when there is change of hours in MTCO, you must open the
disk compartment and correct the time of recording in the disk diagram.
See “Manual of Operation of MTCO”.
4
5
6
1. MTCO TIME
←
2. MTCO TIME ZONE
3. MTCO OVER TIME
(
6
) – Scroll
(
E
) Enter
E
SYSTEM TIME UTC
DATE: 05 / 01 / 2001
TIME: 10:38:25
F1
– Adjust
(
C
) Exit
E
1. MTCO TIME
2. MTCO TIME ZONE
←
3. MTCO OVER TIME
(
5
/
6
) – Scroll
(
E
) Enter
Select MTCO Time
This function will allow correcting the current
date (day, month and year) and hour/minutes.
This function is necessary only if the MTCO
present an error greater than 01 day (or 24
hs).
To change the values of interest, press
E
for
change of field to each value entered and, at
the end, press
F1
and the modification will be
effective.
Select Time Zone
This function adjusts the value of the time
zone to be compared with the world
standard time (UTC). It is pre-adjusted in
less one hour (-01:00).
TIME ZONE
-01:00 h
F1
– Adjust
(
C
) Exit
If you do not want to run the process of the
previous observation, simply reset the time
zone. For this, enter the value zero twice,
press
E
, and then
F1
. We recommend not
changing the original settings of Tachograph
Programmer / Calibrator.
1. MTCO TIME
2. MTCO TIME ZONE
3. MTCO OVER TIME
←
(
5
) – Scroll
(
E
) Enter
This function is not enabling to tachograph
currently in use. Program dates and times in
which the MTCO changes automatically to over
time and
must not
be changed under any
circumstances.
Select next function.
E
E
C
1. INSTALLATION
2. DATE - TIME
←
3. MANUFACT DATA
(
5
/
6
) – Scroll
(
E
) Enter
Select Date - Time
This function will access a sub-menu in which
will be possible to adjust date/time, time zone
and over time.
E