BTC-BR User’s Manual
20
2.4.9.3 – Activate Kitas
Steps
Contents of the display Keys
Procedures
1
2
3
4
2.4.9.4 – Manufacturing data
Steps
Contents of the display Keys
Procedures
1
2
1. INSTALLATION
2. DATE - TIME
3. SETUP KITAS
←
(
5
/
6
) – Scroll
(
E
) Enter
Setup sensor model Kitas
(*)
This function allows that the sensor Kitas,
installed on the vehicle, is recognized by
tachograph MTCO 1390. This transaction affects
the operation of the tachograph and should be
used whenever there is exchange of the sensor
or the tachograph MTCO 1390.
SETUP KITAS
(
E
) Setup
(
C
) Exit
E
E
(*) the sensor Kitas is a differential model. It has
the normal functions of the sensor Hall (positive,
negative and signal of speed) and also a
communication with the MTCO 1390.
If the sensor is not “enabled” it will not recognize
the tachograph and vice versa.
As a result the MTCO will record the speed
normally, when in motion, and will acknowledge
the failure of the sensor when stopped. This can
be seen through the continuous recording from 0
to 30 km/h on the scale of speed of the disk
diagram.
The sensor Kitas is identificated by code
2170/2171
printed in its body. The other numbers
identify the features of each sensor Kitas, for
example, the length of the rod.
SETUP KITAS
SETTING...
(
E
) Setup
(
C
) Exit
SETUP KITAS
SENSOR ACTIVATED
(
E
) Setup
(
C
) Exit
E
C
2. DATE - TIME
3. SETUP KITAS
4. MANUFACT DATA
←
(
5
/
6
) – Scroll
(
E
) Enter
Select Manufacturing Data
This function informs the date on which the
MTCO’s board was manufactured. This
programme is only informative, does not affect
the operation of the tachograph and can not be
changed.
MANUFACTURING DATA
DATE:
31 / 08 / 99
(
C
) Exit
E
C