Siemens APACS+ Скачать руководство пользователя | Manualshive

Страница: 9 / 65

background image

SD39EAM-1r4

Contents

September 2005

vii

Qualified Persons

The described equipment should be installed, configured, operated, and serviced only by qualified persons
thoroughly familiar with this publication. The current version, in Portable Document Format (PDF), is
available at

http://sitescape.sea.siemens.com/

.

For the purpose of this publication and product labels, a qualified person is one who is familiar with the
installation, construction, and operation of the equipment, and the involved hazards. In addition, he or she
has the following qualifications:

•

Is trained and authorized to energize, de-energize, clear, ground and tag circuits and equipment in
accordance with established safety practices.

•

Is trained in the proper care and use of protective equipment such as rubber gloves, hard hat, safety
glasses or face shields, flash clothing, etc., in accordance with established safety practices.

•

Is trained in rendering first aid.

Scope

This publication does not purport to cover all details or variations in equipment, nor to provide for every
possible contingency to be met in connection with installation, operation, or maintenance. Should further
information be desired or should particular problems arise which are not covered sufficiently for the
purchaser’s purposes, the matter should be referred to one of the support groups listed in the Product
Support section of this manual.

The contents of this manual shall not become part of or modify any prior or existing agreement,
commitment or relationship. The sales contract contains the entire obligation of Siemens. The warranty
contained in the contract between the parties is the sole warranty of Siemens. Any statements continued
herein do not create new warranties or modify the existing warranty.

General Warnings and Cautions

WARNING

This equipment contains hazardous voltages, and it has been certified for use in the hazardous locations
specified on the product nameplate and in the Model Designation and Specifications section. Death,
serious personal injury, or property damage can result if safety instructions are not followed. Only
qualified personnel should work on or around this equipment after becoming thoroughly familiar with all
warning, safety notices, and maintenance procedures contained herein. The successful and safe operation
of this equipment is dependent upon proper handling, installation, operation, and maintenance.

The perfect and safe operation of the equipment is conditional upon proper transport, proper storage,
installation and assembly, as well as, on careful operation and commissioning.

The equipment may be used only for the purposes specified in this publication.

«
...
7
8
9
10
11
...
»

Содержание APACS+


































































Отзывы:

Нет отзывов

Похожие инструкции для APACS+

Бренд: iHome Страницы: 17

Бренд: La Gard Страницы: 2

Бренд: S&S Northern Страницы: 9

Бренд: Zmotion Страницы: 48

Бренд: GRAUPNER Страницы: 180

Foxtrot C-IT-0908S

Бренд: TECO Страницы: 4

Бренд: RTS Страницы: 131

AutoLift AL-6000S2

Бренд: AAQ Страницы: 36

Бренд: Vidos Страницы: 8

Бренд: Start Shaphon Страницы: 66

iO-GRID M GFDO-RM01N

Бренд: DAUDIN Страницы: 25

Бренд: A-T Controls Страницы: 19

Бренд: V-Tec Страницы: 12

Бренд: SONIQ Страницы: 7

Бренд: Autopot Страницы: 2

Бренд: Teac Страницы: 23

Бренд: pewag Страницы: 24

Бренд: Kenwei Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды