Siemens APACS+ Скачать руководство пользователя | Manualshive

Страница: 21 / 65

background image

SD39EAM-1r4

Installation

September 2005

2-5

2.4.1 Predelivery

Test

An EAM that will be installed by the user is fully tested and inspected to ensure proper operation. If the
EAM is ordered factory installed in a MODULPAC or other enclosure, the EAM is tested as part of the
APACS system and inspected to ensure proper operation.

2.4.2 Factory

Shipment

EAMs to be installed by the user are placed in static shielding bags and packaged for shipment.
Accessories are packaged separately.

If the EAM is ordered factory installed in a MODULPAC or other enclosure, the enclosure is bolted to a
pallet and wrapped for protection during shipment.

2.4.3 Receipt of Shipment

All cartons should be inspected at the time of their delivery for possible external damage. Any visible
damage should be immediately recorded on the carrier’s copy of the delivery slip.

Each carton should be carefully unpacked and its contents checked against the enclosed packing list. At
the same time, each item should be inspected for hidden damage that may or may not have been
accompanied by exterior carton damage.

If it is found that some items have been damaged or are missing, notify Siemens immediately and provide
full details. In addition, damages must be reported to the carrier with a request for their on-site inspection
of the damaged item and its shipping carton.

2.4.4 Return of Equipment within North America

US Customers:

•

Call the Repair Order PAS Inside Sales/Order Management Group at (215) 646-7400, ext 4RMA
(4762) weekdays between 8:00 a.m. and 4:45 p.m. eastern time to obtain an RMA number. Mark the
RMA number prominently on the outside of the shipment.

•

When calling for an RMA number, provide the reason for the return. If returning equipment for
repair, a detailed description of failure symptoms and system behavior will be requested. Supply a
purchase order number for repairs. Follow the TSC specialist's recommendation for battery
connection, if applicable.

•

If applicable, you must supply a Material Safety Data Sheet (MSDS) with each item being returned if
it was stored or used in a location where hazardous materials were present.

«
...
19
20
21
22
23
...
»

Содержание APACS+


































































Отзывы:

Нет отзывов

Похожие инструкции для APACS+

Бренд: BAS-IP Страницы: 18

Бренд: M-system Страницы: 7

Бренд: Alphatech Страницы: 38

KegMaster 4 Series

Бренд: Keg King Страницы: 17

Бренд: SymCom Страницы: 8

Бренд: DIG Страницы: 28

HS 300 LARGE | FH

Бренд: R. Beck Maschinenbau Страницы: 42

Protege PRT-ENTR-17

Бренд: ICT Страницы: 56

bryant ONEBB3ZAC01

Бренд: Carrier Страницы: 6

RaptorX-SL1200-S15

Бренд: CNC-Step Страницы: 102

Бренд: Technics Страницы: 14

Aeware in.k100 Series

Бренд: Gecko Страницы: 10

Бренд: Multitek Страницы: 4

Бренд: IMER Страницы: 29

Бренд: Upright Страницы: 68

Бренд: BWT Страницы: 56

Бренд: FingerTec Страницы: 4

Бренд: Kenwood Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды