background image

 9 

AOP Operating Instructions – Issue 07/05 

6SE6400-5AP00-0BB0

 

On completion of the upread process the user will be returned to the Main Menu. 

2.4 Parameter 

Download 

The download facility allows a user to write a parameter set to an inverter 
connected in local mode and to a single specified inverter on a network of 
inverters in master mode. 

In master mode a specific inverter must be designated as the recipient inverter. 
The download cannot be accomplished across all connected inverters 
simultaneously. 

1. 

From the Main Menu scroll through the list of options using the 

 

and 

 keys until ‘DOWNLOAD’ is highlighted. 

2. Press 

the   key to confirm the selected option. 

The user is then presented with the download menu. 

 

3. Press 

the   key to confirm or  

 to cancel the process. 

In Master mode the user would have to select a specific inverter from the 
networked inverters. 

4. Using 

the   and 

 keys scroll through the parameter sets of the 

AOP, from which the information is to be written. 

 

 

 

The user will be presented with a confirmation screen. 

 

 

5. Press 

the   key to confirm or 

 to cancel the process. 

The user will be presented with a ‘wait’ screen while communications with the 
specified inverter is established. 

 

Once communications have been successfully established and the download is 
proceeding, the user is presented with a further ‘wait’ screen. 

 

On completion of the download process the user will be returned to the Main 
Menu. 

Содержание AOP





































Отзывы: