Siemens Acuson S2000 Скачать руководство пользователя страница 449

Страница: 449 / 518

Appendi x F Acoustic Output Reference

Instructions for Use

F - 7

The following rules apply to the summary table:

B-mode (2D)

No other mode active.
Only MI (when larger than 1.0) is reported for this mode.

M-mode

May include simultaneous B-mode.

PW-Doppler /

SCW-Doppler

In duplex modes, the largest displayed TIS (scanned or non-scanned) is reported if it is larger

than 1.0.

Color Flow or Power May include simultaneous color flow M-mode, B-mode, and Doppler.

In combined modes, the largest displayed TIS (scanned or non-scanned) is reported if it is

larger than 1.0.

Combined modes

The output is reported as a separate mode if the largest formulation of TIS, TIB, or TIC (if an

intended use) is greater than the corresponding value reported for all constituent modes.

Other

TIC is reported if the transducer is intended for transcranial or neonatal cephalic use.

Содержание Acuson S2000







































































































































































































































































































































































































































































































































Результаты поиска

Содержание Acuson S2000

Отзывы:

Бренды по названию

Популярные бренды

Siemens Acuson S2000, Инструкция по эксплуатации

Результаты поиска

Содержание Acuson S2000

Отзывы:

Бренды по названию

Популярные бренды