Siemens Acuson S2000, Инструкция по эксплуатации

Страница: 273 / 518

Appendi x A Technical Des cription
Instructions for Use A - 15
eSieFusion Imaging
(Available only on the ACUSON S3000 system)

eSieFusion imaging aligns reference data with a real-time ultrasound image for diagnosis
and interventional procedures

Supported reference data: computed tomography (CT), magnetic resonance imaging (MRI)

Compatible transducers: 6C1 HD, 4V1, 4C1, 6C2
Supported studies: Abdomen, Renal

Compatible transducer: 9L4
Supported studies: Musculoskeletal
Equipment
eSieFusion supports the following components:

Ascension Technologies Corporation trakSTAR2 electromagnetic tracking system

Ascension Technologies Corporation Mid-range Transmitter (for the trakSTAR2)

GCX pole to support mid-range transmitter

CIVCO General Purpose 8 mm sensors

CIVCO eTrax Needle Sensor Starter Kit

Transducer-specific tracking brackets without needle guides

Transducer-specific tracking brackets with needle guides
Note: For information on the installation, care, and operation of hardware components, refer to the
manufacturer's operating instructions that accompanied the device.
eSie Touch Elasticity Imaging Option

Provides a qualitative representation of relative tissue stiffness for the region of interest

Requires the 18L6 HD, 14L5, 12L4, 9L4, 6C2, 4C1, 6C1 HD, MC9-4, or EC9-4 transducer
eSie Strain Ratio Option

At the time of publication, eSie Strain Ratio was not cleared for use by the U.S. Food and
Drug Administration. This feature is not enabled or available for use in systems sold in the
U.S.A.

Requires the eSie Touch Elasticity Imaging Option

Provides a quantifiable method to compare the relative stiffness of tissue within two user-
selectable regions of interest