Siemens 670 V2, Руководство по эксплуатации

Страница: 35 / 106

Panel PC 670 V2/870 V2, Control unit
Operating Instructions, Edition 03/2004, CD Documentation and Drivers
5-1
Installation
5
5.1 Securing with clamps
Area of validity
Applies to the central and decentralized designs: Skip this step if you have selected
"installing with screws."
Requirement
•
The recessed mounting cut-out has been completed.
• Clamp from the options. Clamp and grub screws are included in the contents of delivery.
Figure 5-1 Clamp assembly
Procedure
1. Please follow the installation guidelines.
2. Insert the device or the control unit in the decentralized design into the recessed
mounting cut-out from the front.
3. Secure the control unit in the recessed mounting cut-out from behind with the clamp, as
shown in the installation cut-out in the dimension diagrams. Tighten the grub screw to a
torque of 0.4-0.5 Nm.
4. Applies only to the decentralized design: Mount the computer unit at at its planned
installation location. For additional information, please refer to computer unit operating
instructions.