Siemens 670 V2, Руководство по эксплуатации

Страница: 24 / 106

Usage planning
4.3 Make note of identification data
Panel PC 670 V2/870 V2, Control unit
4-2
Operating Instructions, Edition 03/2004, CD Documentation and Drivers
4. Keep the packaging material in case you have to transport the unit again.
Notice
The packaging protects the device during transport and storage. Therefore, never
dispose of the original packaging material!
5. Please keep the enclosed documentation in a safe place. You will need the
documentation when you start up the device for the first time.
6. Check the package contents for completeness and any visible transport damage. Check
for completeness using the enclosed "Contents of Delivery" list.
7. Notify the delivery service in charge immediately if the packages contents are incomplete
or damaged.
Warning
Make sure that a damaged unit is not installed nor put into operation.
4.3 Make note of identification data
Procedure
1. Write down the Microsoft Windows Product Key of the Certificate of Authenticity COA in
the table at the end of this section. The product key is located on the power supply cover
of the computer unit. You will need the product key during the reinstallation of the
operating system.
2. Write down the manufacturer's number SVP and the order number of the computer unit,
e.g. "6AV..." in the table. If repairs are necessaryr, the device can be identified by the
service center on the basis of the SVP number and order number.
Both numbers are located on the rating label of the computer unit at the top of the
ventilator side.
Figure 4-1 Rating label of the computer unit, example
3. Write down the model designation, the serial number e.g. "ST-...," the order number of
the control unit, e.g. "A5E," and the version of the device. in the table. This data is located
on the rating label on the edge of the side of the control unit.