Siemens 5WG1 201-2DB12 Скачать руководство пользователя страница 6

Страница: 6 / 9

Gamma

instabus

Technical product information

June 2014

Gamma arina touch sensor single

double

quadruple

Technical product information

UP 20x, UP 28x/3 and UP 28x/5

Update: http://www.siemens.com/gamma

Subject to change without further notice

Siemens Building Technologies

2.16.1.13/6

Location and function of the display and operat-
ing elements

E2
E3

E3
E6

Figure 3: Display and operating elements

Upper touch area indicator

LED for status annunciation (not available with UP
20x/x2, invisible when turns off)

LED for orientation lighting

LED for programming lighting (invisible when turns
off)

Lower touch area indicator

Labelling field (length: 82 ± 0.15mm, width: 18.35
± 0.1mm, thickness: < 0.2 mm)

IR receiver hole (UP 203/x5 only)

Installation and wiring

General description

The touch sensor is mounted onto the conduit box
together with its mounting frame.
The mounting frame is not included and therefore has to
be ordered separately (see current catalog).

Mounting

−

Mount the mounting frame (F1) onto conduit box (G1)
via mounting slots with mounting screws (F2) (see
figure 4),

−

Wiring the KNX connector (H2).

−

Insert the KNX connector (H2) to the touch sensor (see
figure 5). Please be noted the polarity of bus
connection with mark on housing.

−

Slip the wall switch's main module (F3) together with
(F4) onto the mounting frame and firmly press them
together (see figure 6).

Figure 1: Mounting sequence

Mounting frame

Mounting screws

Back housing

Front housing

Programming button

Labelling field

Содержание 5WG1 201-2DB12










Результаты поиска

Содержание 5WG1 201-2DB12

Отзывы:

Бренды по названию

Популярные бренды

Siemens 5WG1 201-2DB12, Техническая информация о продукции

Результаты поиска

Содержание 5WG1 201-2DB12

Отзывы:

Бренды по названию

Популярные бренды