Siemens 5881, Руководство пользователя

Страница: 46 / 87

SIEMENS 5881 Broadband Internet Router
User’s Guide
Chapter 5 Advanced Setup
QoS
SIEMENS 40
5. In Source IP , select one of the following:
•
From/To : Enables source address checking. Specify the source IP address or range of IP addresses
that must match for this policy to be used.
•
Do not care : Disables source address checking.
6. In Dest IP , select one of the following:
•
From/To : Enables destination address checking. Specify the destination IP address or range of IP
addresses that must match for this policy to be used.
•
Do not care : Disables destination address checking.
7. In Protocol , select one of the following:
•
By number : Enter the protocol number to match in the protocol check.
•
From the drop-down menu:, select the protocol to match in the protocol check ( TCP or UDP ).
•
Do not care : Disables protocol checking.
8. In Source Port , select one of the following:
•
From/To : Enter the source port or range of source ports to match in the source port check.
•
From the drop-down menu, select the application to match in the source port check.
•
Do not care : Disables source port checking.
9. In Destination Port , select one of the following:
•
From/To : Enter the destination port or range of destination ports to match in the destination port check.
•
From the drop-down menu, select the application to match in the destination port check.
•
Do not care : Disables destination port checking.
10. From the Priority drop-down menu, select the priority to place on this policy if match criteria is met. This
can be High, Medium, Normal , or Low . Normal is the default.
11. In Code Point - incoming and Code Point - outgoing , select one of the following:
•
Click the button next to the box to specify the Code Point. Be sure to enter the Code Point in the
appropriate field.
•
Click Default to accept the default Code Point.
12. In Bidirection , select one of the following:
•
On : Enables bidirectional operation of the policy.
•
Off : Disables bidirectional operation of the policy.
13. In Start Time , specify the time of day when the policy becomes active.
14. In Duration , specify the time period for the policy to remain active.
15. In Repetition , select one of the following:
•
Always on : Policy is applied every day.
•
At : Policy is applied only one time on the specified month (MM), day (DD), and year (YY).
•
Every : Policy is applied on the specified day of the week.
16. Click Save .