Siemens 5881 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 87

background image

SIEMENS 5881 Broadband Internet Router
User’s Guide

Chapter 2 Installation

Hardware Installation

SIEMENS

7

Hardware Installation

You may position the Siemens broadband router at any convenient location where it will be well ventilated. Do
not stack it with other devices or place it on the carpet. You can connect the router to an existing Ethernet port
on your computer.

To connect the SpeedStream device via the Ethernet interface, your
computer must have an Ethernet adapter (also called a network
interface card, or NIC) installed. If your computer does not have this
adapter, install it before proceeding further. Refer to your Ethernet
adapter documentation for complete installation instructions. Once you
verify installation of an Ethernet adapter, perform the following
procedure to connect the router to your computer.

To set up the harware connections:

1. With the PC powered off, connect your PC directly to any of the router’s Ethernet ports on the back-panel

labeled

TRUSTED

, using one of the RJ-45 cables provided. You may also connect additional Ethernet

devices to the router’s Ethernet ports using additional RJ-45 cables (not provided).

2. Connect the other end of the Ethernet cable to the Ethernet port on the PC.

3. Connect your Ethernet Interface WAN device (broadband modem or similar) to the Ethernet port labeled

UNTRUSTED

, using another RJ-45 cable.

4. Optionally connect the MGMT port to one of the following:

•

Your PC serial port using another RJ-45 cable and the supplied adapter for router access via the
command line interface.

•

An external using an RJ-11 cable to provide for dial backup.

5. Connect the power adapter to the rear of the router.

6. Plug the power adapter into the electrical wall outlet.

7. Flip the power switch on the router.

8. Power on all connected computers.

You can now configure the TCP/IP settings as detailed in the

PC Configuration

section.

«
...
11
12
13
14
15
...
»

Содержание 5881
























































































Отзывы:

Нет отзывов

Похожие инструкции для 5881

All in One Printer

Бренд: Baracoda Страницы: 42

Бренд: IBM Страницы: 342

Бренд: Linksys Страницы: 2

DHI-NVR5224-24P-4KS2

Бренд: Dahua Страницы: 24

Бренд: Enginko Страницы: 19

Бренд: Infoblox Страницы: 13

Бренд: Asante Страницы: 150

LMP-1202G-SFP Series

Бренд: ANTAIRA Страницы: 19

Бренд: Alarm Страницы: 5

FiberTwist G6426

Бренд: Genexis Страницы: 9

Бренд: TP-Link Страницы: 2

Бренд: Idis Страницы: 40

Бренд: ICP DAS USA Страницы: 60

Database Appliance X6-2-HA

Бренд: Oracle Страницы: 473

Бренд: Avaya Страницы: 90

Бренд: GRASS VALLEY Страницы: 22

Бренд: Cambium Networks Страницы: 560

Бренд: Billion Страницы: 157

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды