System
unit
Plastic drive covers with studs
Remove the front cover as described in "Opening the system unit".
If you remove the second hard disk drive, you must remove the metal plate.
i
1
2
Release the clamps on the corresponding metal plate (1).
Remove the metal plate (2).
1
2
Remove the four screws (1).
Pull the drive out of the drive chassis (2).
A26361-K381-Z129-3-7619
35
System unit
If you remove an accessible drive and do not replace it with another, you
i
must insert the optional angle bracket with the plastic cover. The angle
bracket and the plastic cover can be obtained through your sales outlet or
our customer service.
Place the plastic cover on the angle bracket.
1
2
Push the angle bracket into the drive chassis (1).
Fasten the screws (2).
36
A26361-K381-Z129-3-7619