Siemens Nixdorf RM300 C20, Руководство по эксплуатации

Страница: 52 / 205

42
RM300 C Models U24801-J-Z146-2-7600
5
Installing peripherals
Connecting terminals and printers to the TC4P terminal controller
The TC4P terminal controller has four interfaces for RJ45 connectors. Per controller
you can attach up to 4 terminals and printers to the system unit via V.24, V.11, IHSS
or IMD interfaces. Mixed operation using the various interface types on a single
controller is possible.
Ê Attach the connecting cable and power cord to the peripheral device as
described in the associated operating manual.
Ê Insert the RJ45 connector on the terminal connecting cable into one of the four
interfaces (ports) of the controller.
You can determine the interface type with the aid of
SYSADM
(alphanu-
meric monitor) or
Config
(graphical monitor). Also refer to the manuals
“System Administration and Hardware Configuration Using the SYSADM
User Interface” and “Hardware Configuration with Config under
SINIX/windows”.
The interfaces of the controller are incremented from left to right as port
1 – 4.
To find out the installed interface type for the four RJ45 ports, please refer to the
enclosed information leaflet on slot numbering and port assignment.
Attaching peripherals to the TC32 terminal controller
Figure 9: TC32 terminal controller (CT50) - (optional) -
The EISA TC32 terminal controller (CT50) allows you together with the expansion
board CT51 to directly attach up to 32 asynchronous terminals, printers or modems.
Connections are made via the two connector boxes CT52 and CT53, each of which
has sixteen RJ45 connectors for attaching peripheral devices. Each channel can
provide a maximum transmission speed of 38.4 kbit/s.
Also refer to the Technical Manual “Terminal Controller 32 Ports EISA - CT50”.
i