Siemens Nixdorf D970, Техническое руководство

Страница: 52 / 120

Settings in BIOS Setup
Menu Server
42
A26361-D970-Z120-3-7619
Pager Configuration
calls the submenu in which you can make the settings for remote transmission of
errors by means of a pager. The server management BIOS can send a message via
an attached modem (external: serial 1, serial 2; internal: modem board) to a pager
if a system error occurs. Further settings for remote error transmission must be
made by a server management process (e. g.
ServerMan
) of the operating system or
using
SCU
. The telephone number of the pager server, the subscriber number and
the modem initialization sequences can also be entered there.
PhoenixBIOS Setup
Server
Pager Configuration Item Specific Help
Pager: [Disabled]
Pager Interface Addr.: 3E8h
Server Number: [ 0]
Baud Rate: 2400
Com. Setting: 8/1, No Parity
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
← →
Select Menu Enter Select
Ê
Sub-Menu F7 Previous Values
Example for the submenu
Pager Configuration
Pager
enables or disables the pager.
Enabled
In the event of an error a message (server number) is sent to a
pager. A modem must be attached that can be accessed at the
address set in the field
Pager Interface Addr.
.
Disabled
In the event of an error no message is sent to a pager (default
entry).
!
The modem must be set so that it can be accessed via the pager interface
address (see documentation on the modem). On external modem attached
via
Serial 1
or
Serial 2,
the pager interface address must correspond to the
setting for
Serial 1
or
Serial 2
on the screen page
Advanced.
Pager Interface Addr. - Pager address
Requirement:
Enabled
must be set in the field
Pager
.
Defines the I/O address used to communicate with the modem via a serial
interface.
3F8h, 2F8h, 3E8, 2E8h
The specified I/O address is used for communication with the