Settings in BIOS Setup
Main menu
14
A26361-D970-Z120-3-7619
Boot Options
calls the submenu in which you can select the settings for system startup.
PhoenixBIOS Setup
Main
Boot Options
Item Specific Help
POST Error Halt:
[No Halt On Any Errors]
Quick Boot:
[Disabled]
Boot Sequence:
1. Diskette
2. Hard Disk
F1
Help
↑↓
Select Item
-/+
Change Values
F9 Setup Defaults
ESC Exit
← →
Select Menu
Enter Select
Ê
Sub-Menu
F7 Previous Values
Example for submenu
Boot Options
POST Error Halt - Aborting system startup
defines whether the system startup is to be aborted and the system halted when an
error is detected.
Halt On All Errors
If the self-test detects an error, system startup is aborted after the
self-test, and the system is halted.
No Halt On Any Errors
The system startup is not aborted. The error is ignored as far as
possible. The error is ignored as far as possible. (Default entry.)
Quick Boot
can reduce the extent of the self-test and thus accelerate the system startup.
Enabled
When the system is switched on, the quick self-test is carried out,
in which the floppy disk drives are not checked.
Disabled
The entire system configuration is checked when the system is
switched on. (Default entry.)
Boot Sequence
defines the sequence in which the system BIOS searches the drives for system files
to start the operating system. If you wish to change this sequence, place the cursor
on the entry for the drive you to which wish to move forward ( +
key) or back
( -
key).
Содержание D970
